| Environmental |
| Operating Temperature |
-25° to +55°C (-13° to +130°F) |
| Relative humidity |
+35° C (95° F), 95% RH |
| Waterproof |
IPX6 |
| Max relative wind velocity |
Max relative wind velocity |
| Power & Dimensions |
| Power consumption (with 10m cable) |
Operating: 14.5 to 27W at 13.8 V |
| Standby |
3.9 W (Typ.) at 13.8 V DC ~ 170 mA |
| DC input (at end of radar cable) |
9 V to 31.2 V DC (12/24 V systems) |
| Reverse polarity protection |
Yes |
| Minimum startup voltage |
10.75 V DC |
| Transmitter source (pre-heating time) |
No magnetron — Instant On |
| Physical |
| Outside dimensions |
Diameter 610 mm (24"), Height 225 mm (8.9") |
| Scanner weight (no cable) |
6.75kg (14.9 lbs) |
| Radar and Antenna parameters |
| Radar ranges |
100 m (328 ft) to 48nm with 18 range settings, (nm/sm/km) |
| Rotation (mode dependent) |
20 - 60 rpm (mode and MFD dependent) |
| Transmitter frequency |
X-band - 9.4 to 9.5 Ghz |
| Transmitter source (warm-up time) |
No Magnetron — all solid state. Instant On™ |
| Plane of polarization |
Horizontal Polarization |
| Transmitter peak power output |
25watts |
| Minimum range |
6 m (19.7 ft) |
| Sweep repetition frequency |
700-2400 Hz (mode dependent) |
| Pulse length |
0.04 - 64 usec |
| Sweep bandwidth |
48 MHz max |
| Horizontal beam width (Tx and Rx antenna) |
3.9° nominal (-3 dB width) |
| Target Seperation Control |
OFF: 3.9°+/-10% (-3 dB width nominal), LOW: ~3.4°+/-10% (-3 dB width nominal), MED: ~2.5°+/-10% (-3 dB width nominal), HIGH: ~2.0°+/-10% (-3 dB width nominal) |
| Vertical beam width (Tx and Rx antenna) |
22° (-3B width nominal) |
| Side lobe level (Tx and Rx antenna) |
Below -18 dB (within ±10°);Below -24 dB (outside ±10°) |
| Noise figure |
Less than 5 dB nominal |
| Communications/Cabling |
| Protocol |
Ethernet 100 Base T |
| Maximum inter connecting cable length |
30 m (98.5 ft) — available as option, use NEP-2 for longer cable runs |